LNG TANKS AND EQUIPMENT

Engineering, development and manufacture of tanks for the storage of liquefied natural gas LNG and other liquefied gases at cryogenic pressure and temperature.

Our technical team for the development and manufacture of tanks for the storage of liquefied natural gas (LNG) and other cryogenic storage gases, collaborates closely with our clients in the design and definition of the products before their manufacture and supply, adapting them to the needs of the project. Our main clients include the most important multinational energy companies, the most prestigious engineering companies and the best professionals in the sector in all international markets, who have Lapesa products for all types of projects related to LNG.

STATIC TANKS FOR LNG STORAGE

STATIC TANKS FOR LNG STORAGE

Horizontal tanks • Vertical tanks

Static tanks for LNG storage in horizontal or vertical installation up to 320 m3 capacity, according to European Directive 2014/68/CE and with CE marking. Upon request, according to ASME VIII div.1 and with ASME marking, or adapted to the regulatory requirements and specific requirements of the place or country of destination.

Horizontal tanks
2200 H series horizontal tanks
3000 H series horizontal tanks
3500 H series horizontal tanks
3900 H series horizontal tanks
4200 H series horizontal tanks
Vertical tanks
2200 V series vertical tanks
3000 V series vertical tanks
3500 V series vertical tanks
3900 V series vertical tanks
4200 V series vertical tanks
TANKS FOR VNG SERVICE STATIONS

TANKS FOR VNG SERVICE STATIONS

Tanks for storage and supply of vehicular natural gas (VNG) in service stations, compressed natural gas (CNG), as liquefied natural gas (LNG) or both at the same time. Vertical tanks with capacities, design pressure and P&ID adapted to each specific need or project.

Tanks for VNG service stations
TRANSPORTATION AND SERVICE

TRANSPORTATION AND SERVICE

ISO-containers • Semi-trailer tankers

ISO-containers and semi-trailer tankers, for the transport and service of LNG (UN 1972), ethane (UN 1961), ethylene (UN 1038) or nitrogen (UN 1977), manufactured under applicable European standards and Directives. Volumetric capacity for transport tanks and composition of the transfer equipment, adapted to the specific requirements of the client.

ISO-containers
ISO-containers
Semi-trailer tankers
Semi-trailer tankers

Frequently Asked Questions (FAQs)

At what maximum pressure should LNG be stored?
The LNG tank pressure limit is that which the tank is designed for. This value can be found on the mandatory nameplate of each equipment.
What regulations apply in Spain to the manufacture of static tanks for LNG?
The only mandatory guideline in the manufacture of storage tanks is the European Pressure Equipment Directive (PED 2014/68/EU). The choice of the standard or code for its design and manufacture is the responsibility of the manufacturer. For all LNG equipment that is installed in Spain, the indications of the Spanish regulations on LNG facilities must be observed.
I have a tank prepared for LNG storage. Can I store liquid nitrogen or other gases in it?
Each fluid has particular characteristics that must be taken into account. In some cases it will not be possible to store another fluid, or restrictions on the degree of filling must be taken into account. In other cases, it will be possible by making slight changes to the level measurement system.
Should I carry out a leak test on my LNG tank at the time of its installation?
According to Spanish regulations, a vacuum check is enough (it must be less than 0.6 mbar).
How often is it mandatory to check the vacuum in my cryogenic tank chamber?
Although the only mandatory inspections are those indicated in the Gas Regulations and the Pressure Equipment Regulations, it is advisable to establish a shorter periodicity to carry out this check. Each maintenance company must mark a maximum period, according to their maintenance plan.
What are the so-called economizers (in the field of a cryogenic storage tank)?
It is a circuit by which fluid is sent in the gas phase to the consumption pipe (normally the liquid phase). In this way, a rapid decrease in pressure in the tank is achieved, which can prevent the opening of safety valves. If there is no consumption, the economizer cannot perform its function.
How often is it advisable to create vacuum the isolation chamber?
There is no pre-established criterion. It is recommended to create vacuum (= reduce pressure) before reaching the value of 0.6 mbar.